Canon DR-X10C - Manual (Page 83)

5-18
Chapter 5 Maintenance
CAUTION
Peel off the seal covering the nozzles of a cartridge only if you
are going to use it immediately. Also, avoid touching the metal
contacts or nozzles of the ink cartridge.
7. Install the new cartridge with the nozzles facing to the
right.
8. Push the ink cartridge as indicated by the arrow until
it clicks into place.
9. Carefully close the imprinter cover.
10. Press down on the tab of the imprinter cover (as
indicated by the arrow in the illustration) to lock it.
IMPORTANT
When closing the imprinter cover, make sure that it is locked so
that it will not open unexpectedly. An error message appears on
the display panel if the imprinter cover is open.