Canon DR-X10C - Manual (Page 87)

6-2
Chapter 6 Practical Examples
1.
Messages
There are two types of display panel messages: “status indicator messages” and “error messages” that appear when the scanner
encounters a problem.
Status Display
The following messages appear on the display panel to
indicate the scanner’s operating state:
■ Counting...
Status: Operating in Count-Only mode.
■ Insert the Sheet
Status: In the Cleaning Mode, waiting for the cleaning
sheet to be inserted.
■ Press Start Key
Status: Waiting. Load a document and press the Start key.
■ Ready
Status: The scanner is ready to use.
■ Scanning...
Status: Scanning is in progress.
■ Sleeping...
Status: The scanner is entering the Sleep mode. Press any
key to recover.
■ Wait...
Status: The scanner is busy processing. Wait until the
display changes.
■ Verifying…
Status: The scanner is verifying a scan.
■ Replace Roller
Status: It is time to replace the rollers (the number of fed
pages has exceeded 500,000).
(See “Roller Replacement
Cycle” on p. 5-12.)