Canon DR-X10C - Manual (Page 78)

5-13
Chapter 5 Maintenance
Checking and Resetting the Page Counter
The roller usage counter can be checked and reset using the
Roller Counter User Mode setting.
IMPORTANT
• This counter shows the number of pages transported by the
currently installed feed rollers. Make sure to reset the counter
when you replace the rollers.
• The Total Counter shows the total number of pages fed over the
life of the scanner, and cannot be reset.
1. Press the Menu key on the control panel to activate
the User Mode.
2. Press the [ ] key twice to display [Roller Counter].
3. Check the number of pages fed by the rollers, and
press [Enter].
The counter reset mode is activated.
4. Press the [ ] key to select [RESET], and press
[Enter].
The counter is reset to zero.
5. Press the [Stop] key to exit the User Mode.
Menu Key
Enter Key