Canon DR-X10C - Manual (Page 147)

10-4
Chapter 10 Practical Examples
2.
Practical Examples
This section provides an overview of which items to set according to the purpose when configuring the scanning settings. For details
on settings, see
Chapter 8 “ISIS/TWAIN Driver Settings Dialog Box” .
Scanning Documents of Unregistered
Page Sizes
Configuring the following settings allows you to scan a
document of an unregistered page size.
■ Scanning documents longer than 17.01" (432
mm) (Long Document Mode)
When you want to scan a document that is longer than
17.01" (432 mm), you can enable [Long Document] in the
scanner settings and set the page size setting to [Auto-
detection] in order to scan documents up to 39.37" (1,000
mm) long.
1. In User Mode, set [Long Document] of the scanner
settings to [ON].
(See “Long Document Mode
Setting” on p. 3-5.)
2. Set the page size to [Auto-detection] and scan the
document.
IMPORTANT
• When scanning a long document, load and scan the pages of
the document one at time.
• Some scanning mode and resolution settings may produce
incomplete page images. In this case, try decreasing the
resolution or, if scanning in color mode, switch to black and
white.
■ Scanning documents wider than the feeder
inlet (Folio Scan)
When you want to scan a document that is wider than the
feeder inlet, you can scan the document if you fold the
document into two, load it into the feed tray, and set the
scanning side setting to [Folio].
(See p. 4-7.)
Reconstructed Image
Bypass
Mode Key
Front Back