Canon DR-X10C - Manual (Page 47)

3-17
Chapter 3 Basic Operation
10. Place your document and click [Save] to start
scanning.
IMPORTANT
You must load your documents as described below, depending
on the specified Feed Option setting.
• If the [Standard Feeding] Feed Option is enabled, load your
documents before scanning. When all of the documents have
been scanned, the Continue Scanning dialog box appears.
• If the [Manual Feeding] Feed Option is enabled, the Bypass
Mode key is lit and the Document Feed Tray is raised. You
must insert one page at a time to be scanned, and press the
Stop button to display the Continue Scanning dialog box.
• If a Feed Option other than [Standard Feeding] or [Manual
Feeding] is selected, once you have started scanning, each
document placed in the Document Feed Tray is scanned, and
when no document is loaded, the scanner enters the standby
state.
• If the [Automatic Feeding] Feed Option is enabled, scanning
is performed automatically whenever a sensor in the
Document Feed Tray detects a loaded document, and
pressing the Stop key causes the Continue Scanning dialog
box to appear.
• If the [Panel-Feeding] Feed Option is enabled, the Start key
lamp is lit. You must load a document and press the Start key
to scan. Pressing the Stop button causes the Continue
Scanning dialog box to appear.
11. When the [Continue Scanning] dialog box appears,
verify that a document is loaded, and click either
[Continue Scanning] or [Stop Scanning].
IMPORTANT
If Use Continue Scanning dialog in the [Scan] menu is not
checked, scanning finishes without displaying the Continue
Scanning dialog box.
12. When scanning is complete, select [Exit] from the
[File] menu to quit CapturePerfect 3.0.
Bypass Mode Key
Start Key (Lamp lights green)