Canon CEL-SE65A210 - Manual (Page 103)

Changing the Photo Effect (continued)
100
When is selected
A screen allowing you to set the contrast,
sharpness and color saturation appears
when you press the SET button.
In this screen, select the item you wish to
set using the S or T arrow on the omni
selector and set it using the W or X arrow
on the omni selector, then press the SET
button.
Contrast
z
This function allows you to adjust the degree of brightness.
z Select from – (Weak), 0 (Neutral) and + (Strong).
Sharpness
z
This function allows you to adjust how sharply outlines are defined.
z Select from – (Weak), 0 (Neutral) and + (Strong).
Saturation
z
This function allows you to adjust the color depth.
z Select from – (Low), 0 (Neutral) and + (High).
You can shoot the image right after selecting settings by pressing the
shutter button. The menu displays again after the shot, allowing you
to change the settings easily.
4
Press the FUNC. button or click the main dial.
z The white balance cannot be set when (Sepia) or (B/W)
mode is selected.
EC140CUG_Eng.book Page 100 Thursday, July 29, 2004 3:16 PM