Canon CEL-SE65A210 - Manual (Page 123)

120
Using the ND Filter
The brightness can be decreased by setting the ND filter on. This
allows you to select a smaller aperture value and a slower shutter
speed than usual.
Mode Dial
1
Press the DISPLAY button to turn the LCD monitor
on.
2
Select [ND Filter] in the [ (Rec.)] menu.
z See Selecting Menus and Settings (p. 46).
3
Select [On] and press the MENU button.
z ND appears on the LCD monitor.
z Always use a tripod to prevent camera shake in this mode.
z Standard brightness is decreased to approximately 1/8 when the
ND filter is on. For example, if the appropriate aperture value is
8, it becomes 2.8 when the ND filter is on.
EC140CUG_Eng.book Page 120 Thursday, July 29, 2004 3:16 PM