Canon CEL-SE65A210 - Manual (Page 79)

76
Self-Timer
Setting the Number of Seconds until Shooting
You can set the number of seconds from the time the shutter button
is pressed to the time the image is shot to 10 seconds or 2 seconds.
Mode Dial
1
Press the button.
z Press the button several times until
appears on the display panel. If the
LCD Monitor is on, press the button
until the icon or icon appears in
the monitor.
z You can cancel the self-timer by pressing
the
button again.
z When the self-timer is set to ( ), the shutter activates
10 (2) seconds after the shutter button is pressed fully.
z When is selected, the self-timer sounds and the self-timer
lamp starts blinking when the shutter button is pressed all the way.
The blinking gets faster two seconds before the shutter activates.
z When is selected, the self-timer lamp blinks fast from the
beginning. The shutter activates in two seconds.
z You can change the self-timer sound by changing the setting in
[Selftimer Sound] in the [
(My Camera)] menu (p. 53).
1
Select [Self-timer] from the [
(Rec.)] menu.
z See Selecting Menus and Settings
(p. 46).
2
Select [ ] (10 seconds) or [ ]
(2 seconds) and press the MENU
button.
EC140CUG_Eng.book Page 76 Thursday, July 29, 2004 3:16 PM