Canon CEL-SE65A210 - Manual (Page 31)

28
Setting the Language
Use this feature to select the language used in the menus and
messages.
1
Turn on the camera (p. 29).
2
Press the MENU button.
z The [ (Rec.)] or [ (Play)] menu
appears.
3
Press the X arrow on the omni
selector to select the [ (Set up)]
menu.
z Pressing the JUMP button or turning the
zoom lever also switches between
menus.
4
Press the S or T arrow on the
omni selector to select
[Language] and press the SET
button.
5
Press the S, T, W or X arrow on
the omni selector to select a
language.
6
Press the SET button.
z After adjusting the settings, press the MENU button to close the
menu window.
z In playback mode, you can change the language by holding the
SET button while you press the JUMP button, except when a
separately sold printer is connected or during movie playback.
(Rec.) Menu in
Auto mode
EC140CUG_Eng.book Page 28 Thursday, July 29, 2004 3:16 PM