Canon CEL-SE65A210 - Manual (Page 124)

121
Sh
oo
ting
– Sel
e
ct
in
g Pa
rt
icu
la
r Ef
fec
ts
Setting the Auto Rotate Function
This camera is equipped with an Intelligent Orientation sensor that
detects the orientation of an image shot with the camera held
vertically and automatically rotates it to the correct viewing
orientation in the display. You can set this function on/off.
Mode Dial
1
Select [Auto Rotate] in the [
(Set up)] menu.
z See Selecting Menus and Settings
(p. 46).
2
Select [On] and press the MENU
button.
z When this function is On, an icon
showing the orientation of the camera
appears at the upper right corner of the
LCD monitor (when information display
is on).
z This function may not operate correctly when the camera is
pointed straight up or down. Check that the correct camera
orientation icon (e.g.
) is displayed and if it is not, then set the
Auto Rotate function to Off.
z Even if the Auto Rotate function is set to On, the orientation of
images downloaded to a computer will depend upon software
used to download the images.
z When the camera is held vertically to shoot, the Intelligent
Orientation sensor judges the upper end to be “up” and the lower
end to be “down”. It then regulates the optimal white balance and
exposure for vertical photography. This function operates
regardless of the On/Off status of the Auto Rotate function.
Normal
Camera on right end
Camera on left end
EC140CUG_Eng.book Page 121 Thursday, July 29, 2004 3:16 PM