Canon CEL-SE65A210 - Manual (Page 78)

75
Sh
oo
ting
– Le
tting
the
Came
ra
S
el
ec
t Se
tting
s
Super Macro Mode
Compared with normal Macro mode, you can get closer to the
subject and magnify it more, when shooting. The background can
also be shot with different effects.
You can shoot subjects in Super Macro mode when the distance
from the end of the lens to the subject is in the following range: 5 to
20 cm (2.0 to 7.9 in.) (wide angle end – 86 mm (35mm film
equivalent)).
The resolution can only be set to M2, M3 or S. If the resolution is set
to L, M1 or RAW when you set the camera to Super Macro mode,
the resolution will automatically be changed to M2. (The resolution
will return to the previous setting when you cancel Super Macro
mode.)
Mode Dial
1
Press the DISPLAY button to turn the LCD monitor
on.
2
Hold down the button until
appears on the LCD monitor.
z The zoom position moves within the
recordable area.
z You can cancel the super macro mode by
pressing the
button again.
z Be careful not to bang the lens against the subject when
shooting in Super Macro mode.
z The digital zoom cannot be used.
z Recordable areas at the minimum shooting range are as follows:
z Super Macro mode can also be selected and saved in Custom
Modes C
1 and C 2 .
Zoom Position
(35mm film equivalent)
Recordable Area
Wide angle end Approximately 48 x 36 mm (1.9 x 1.4 in.)
86 mm Approximately 24 x 18 mm (0.9 x 0.7 in.)
EC140CUG_Eng.book Page 75 Thursday, July 29, 2004 3:16 PM