Canon CEL-SE65A210 - Manual (Page 36)

33
P
re
pa
ring
th
e Came
ra
, B
asi
c F
unc
tio
ns
Using the LCD Monitor
The LCD monitor can be used in the following cases:
z
when you want to check your composition as you shoot.
z when you want to playback the images you have shot.
z when you want to operate the camera menus.
The LCD monitor can also be positioned as below.
1
The monitor can be opened
through 180 degrees, and then
rotated 180 degrees to face
outwards, in the same direction as
the lens.
z In this position, icons and messages do
not appear on the LCD monitor.
z The image shown on the LCD monitor is
automatically flipped and reversed (the
Reverse Display function) so that it
appears correctly from in front of the lens.
(You can disable the Reverse Display
function (p. 50).)
The monitor can be
locked open at 90
degrees (A), or opened
all the way to 180
degrees (B). The monitor can be
rotated forward 180
degrees in the direction
of the lens, or rotated
backward 90 degrees. The LCD monitor will
automatically turn off
when the LCD monitor
clicks shut against the
camera body facing in.
To protect the monitor,
always make sure the
monitor is stowed as
described above when
the camera is not
in use.
(B)
(A)
EC140CUG_Eng.book Page 33 Thursday, July 29, 2004 3:16 PM