Canon CEL-SE65A210 - Manual (Page 195)

Camera Care and Maintenance (continued)
192
Camera Care and Maintenance
Use the following procedures to clean the camera body, lens,
viewfinder, LCD monitor and other parts.
4
Place a new date battery into the date battery holder
with the negative terminal (–) facing upward.
5
Replace the date battery holder, replace the battery
pack and close the battery cover.
If you ever dispose of your camera, first remove the date
battery for recycling according to the recycling system of
your country.
Camera body : Wipe the body clean with a soft cloth or eyeglass lens
wiper.
Lens : First use a lens blower brush to remove dust and dirt,
then remove any remaining dirt by wiping the lens lightly
with a soft cloth.
z
Never use synthetic cleansers on the camera body or
lens. If dirt remains, contact the nearest Canon
Customer Support Help Desk as listed on the separate
Canon Customer Support leaflet.
Viewfinder
LCD Monitor : Use a lens blower brush to remove dust and dirt. If
necessary, gently wipe the viewfinder and LCD monitor
with a soft cloth or an eyeglass lens wiper to remove
stubborn dirt.
z
Never rub or press forcefully on the LCD monitor or
viewfinder. These actions may damage them or lead to
other problems.
z Never use thinners, benzene, synthetic cleansers or water to
clean the camera. These substances may distort or damage the
equipment.
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggoolen maar inleveren als KCA
EC140CUG_Eng.book Page 192 Thursday, July 29, 2004 3:16 PM