Canon CEL-SE65A210 User Manual
Page 86
83
Sh
oo
ting
– Sel
e
ct
in
g Pa
rt
icu
la
r Ef
fec
ts
z
The nature of CCD image sensors is such that noise in the
recorded image increases at slow shutter speeds. This camera,
however, applies special processing to images shot at shutter
speeds slower than 1.3 seconds to eliminate the noise, thereby
producing high-quality images. Nevertheless, a certain amount
of processing time may be required before the next image can
be shot.
z
See page 206 for settings that can be changed in this mode.
z
Please note that camera shake becomes a factor at slow shutter
speeds. If the camera shake warning
appears on the LCD
monitor, secure the camera to a tripod before shooting.
z
The fastest shutter speed that can be used effectively with the
flash is 1/250 second. If you try to select a speed faster than
1/250 second, the camera automatically resets the shutter speed
to 1/250 second.
z
The aperture value and shutter speed change according to the
zoom state as follows.
Aperture Value
Shutter Speed (seconds)
Wide Angle
F2.0 – 3.5
to 1/1250
F4.0 – 8.0
to 1/2000
Telephoto
F3.0 – 5.0
to 1/1250
F5.6 – 8.0
to 1/2000
EC140CUG_Eng.book Page 83 Thursday, July 29, 2004 3:16 PM