Canon CEL-SE65A210 - Manual (Page 113)

Switching between Flash Adjustment Settings (continued)
110
1
Press the DISPLAY button to turn the LCD monitor
on.
2
Press the FUNC. button, then select using the S
or T arrow on the omni selector.
3
Adjust the compensation using the main dial or the
W or X arrow on the omni selector.
z You can shoot the image right after selecting settings by pressing
the shutter button. The menu displays again after the shot,
allowing you to change the settings easily.
4
Press the FUNC. button or click the main dial.
z To cancel the compensation, return the setting to .
e.g. [Flash Adjust] set to [Auto] e.g. M mode or [Flash Adjust]
set to [Manual]
EC140CUG_Eng.book Page 110 Thursday, July 29, 2004 3:16 PM