Canon CEL-SE65A210 User Manual
Page 187
Using an Externally Mounted Flash (Sold Separately) (continued)
184
z
Attach the flash heads to their respective
flash head mounts.
5
Press the
button to set the camera to Macro mode
and set [ND Filter] to [On].
z
Macro mode (p. 74)
z
ND filter (p. 120)
z
To remove the conversion lens adapter, hold down the ring
release button and turn the adapter in the opposite direction
shown in Step 2.
z
When you are using Macro Ring Lite MR-14EX or Macro Twin
Lite MT-24EX, you can shoot in E-TTL automatic flash exposure
compensation mode just by setting the camera’s shooting mode
to P, Av or Tv.
You are recommended to set the aperture in Av or M mode for
full-fledged macro flash photography.
z
The following functions can be used with Macro Ring Lite
MR-14EX or Macro Twin Lite MT-24EX mounted.
• E-TTL Automatic Flash Exposure Compensation
• FE Lock
• Flash Sync (1st-curtain/2nd-curtain)
(The flash’s 2nd-curtain setting takes precedence.)
• Daylight Synchro
• Slow Synchro
• Flash Exposure Compensation
z
When exposure compensation settings are selected on both the
camera and the Macro Ring Lite MR-14EX and Macro Twin Lite
MT-24EX, the macro ring lite setting takes precedence (when in
E-TTL mode) and the camera setting is overridden.
Flash Heads
EC140CUG_Eng.book Page 184 Thursday, July 29, 2004 3:16 PM