KGUARD Security AR 1621-2CKT001 - Manual (Page 29)

ENGLISH
Aurora Series: Operating the DVR
DVR User’s Manual
29
Click to access the Volume Control bar.
-
Drag the slider to adjust the volume level.
Click to turn mute on or off.
Click to access the PTZ Control panel.
• Select the desired channel.
• Click the direction arrow to select the direction of the PTZ camera. For the other function
settings, see below:
Note:
These settings are only applicable if a PTZ speed dome is properly installed on DVR via RS-485
connection.
Click to start/stop manual recording.
Activate the
wiper function.
Zoom out.
Reduce the
iris level.
Reduce the
focus speed.
Adjust the camera
turning speed.
Increase the
brightness level.
Increase the iris level.
Increase the focus speed.
Zoom in.
Set a preset point.
To set a specific preset
point:
1. Select the desired
channel.
2. Click the direction
arrow to select the
direction of the PTZ
camera.
3. Select a preset point
number.
Go to a specific preset
point.
Delete the selected
preset.
Start/stop cruise of
the PTZ camera.
Add or delete cruise
line.