KGUARD Security AR 1621-2CKT001 - Manual (Page 39)

ENGLISH
Aurora Series: Configuring DVR Settings
DVR User’s Manual
39
Note:
If the record mode setting is set to 960H, it is recommended to use a 600 TVL or higher resolution camera.
Frame rate: Select how many images per second the DVR will record. According to the standard, “Real time” is 30fps
(NTSC) or 25fps (PAL). With the resolution
WD1 (960H) the recommended frame rate with 8 channels is 8fps, and
with 16 channel is 6fps.
Quality: Select the video quality. Best means the lowest compression rate but larger video file size; Normal means
the highest compression rate and smaller video file size.
Copy CH/To CH: Copy the current settings to all channels or one specific channel. Click the arrow to select an option
and then click Copy. If you use the Copy All function with resolutions HD1, D1, WHD1, the resolutions are copied
only to channels CH1 ~ CH4.
After all settings are complete, click Apply.
Schedule
The schedule that is displayed on-
screen applies only to one channel at
a time.
There are three types of recording
modes to choose from.
Manual: The recording is done
manually. To start recording, you need
to click on recording button(
) on
Task Bar or press the Record button
on remote control. See
“Remote
Control” on page 9 or “Task Bar”
on page 26 .
Normal: The DVR will continuously record for any period where Normal mode is selected.
Note:
Make sure the space on hard disk is sufficient when using constant recording.
Alarm: The DVR will only record when an alarm is detected. To know more on alarm settings and events, please see
“Alarm Setup” on page 42.
CH: Select the channel you want to set the schedule.
Copy CH/To CH: Copy the current settings to all channels or one specific channel. Click the arrow to select an option
and then click Copy.
After all settings are complete, click Apply.