KGUARD Security AR 1621-2CKT001 - Manual (Page 53)

ENGLISH
Aurora Series: Configuring DVR Settings
DVR User’s Manual
53
Sending interval: Select an e-mail sending interval.
Mail server(SMTP): Enter the SMTP Server of the sending e-mail server. If you do not know the SMTP mail server
address, please consult with the e-mail service provider or check the information on their web page.
Port: Enter the SMTP port of the sending e-mail server.
Note:
By default, the SMTP port is 25 for e-mail without SSL verification. For Gmail server or for e-mail that needs SSL
Verification, the SMTP port is 465, by default. Check with your ISP for the correct setting.
Connection security: If your e-mail server needs the SSL (Secure Sockets Layer) or TLS (Transport Layer Security)
verification, select SSL/TLS. Check with your e-mail service provider for the applicable setting.
User name: Enter the e-mail address of the sender.
Password: Enter the password of the sender’s e-mail.
To: Enter the e-mail address where the notification e-mail is to be sent.
CC: Enter the e-mail address that you want to copy to. You can set up to 4 e-mail addresses.
Test: Click to send a test e-mail to the recipient’s e-mail address.
After all settings are complete, click Apply.
UPnP
UPnP: (Universal Plug and Play) is an
universal protocol for widespread
plug-and-play devices to ease the
network implementation. Many
routers that support UPnP do not
come with the feature enabled by
default. If this function does not work,
be sure to check if UPnP setting is
enabled.
Enable: Select Enable to activate the
UPnP function.
After all settings are complete, click
Apply.