KGUARD Security AR 1621-2CKT001 - Manual (Page 34)

ENGLISH
Aurora Series: Configuring DVR Settings
34
DVR User’s Manual
Time zone: Select the time zone in your location.
Note:
In the USA, EST (Eastern Standard Time) is GMT -5:00, where PST (Pacific Standard Time) is GMT -8:00.
The UK is GMT +0:00, and the East Coast of Australia is GMT +10:00.
Auto update: Click to automatically set the date and time according to the network.
Time Server: Choose the time server that will keep track of DST settings (see in the following section).
Note:
If you choose to use the Time Server, make sure your DVR has a constant Internet connection.
DST (Daylight Saving Time)
You can allow the DVR to
automatically update its internal clock
when daylight saving starts and ends.
Enable: Check this option to allow the
DVR automatically adjust the time for
DST. To disable, uncheck this option.
Mode: Select the DST mode.
• Week: Enter the Start Time
and End Time information by
selecting the starting/ending
month, week, day, and entering
the starting/ending time.
• Date: Enter the Start Time
and End Time information by
entering the starting/ending
date and time.
Offset: Select the amount of time to offset for DST.
From/To: Enter the Start Time and End Time information when the DST begins and ends at your location.
Display Setup
Display
Name: Enter your desired channel
title to be displayed on the screen.
Mask: You can create and shape a
privacy zone (mask) which hides part
of the image on the selected channel.
To do so, select Settings and enter the
Mask submenu. See
“Privacy Zone
Settings” on page 35.
Color: Adjust image hue, brightness,
contrast, and saturation settings.
Select Settings enter the Color
submenu. See
“Color Settings” on
page 35.