KGUARD Security AR 1621-2CKT001 - Manual (Page 54)

ENGLISH
Aurora Series: Configuring DVR Settings
54
DVR User’s Manual
Cloud
At present, your DVR supports the
Dropbox cloud storage. Before setting
up the cloud storage on the DVR,
make sure your Dropbox account has
been created and active (Dropbox
website: www.dropbox.com) and
the network settings of your DVR has
been configured properly.
Enable: Check the box to enable the
cloud storage function.
Interval: Select the interval time
between uploading snapshots to the
cloud storage.
Note:
To 1 minute interval option you can
choose only 4 channels.
Motion detection: Select Enable if you want the DVR to upload snapshots when motion is detected.
CH: Check the respective channel box to upload the channel snapshots.
Receiver: Enter your e-mail account to receive the cloud storage activation link.
Server switch: Select Default and click Active Cloud directly.
Note:
If the Server switch setting is set to Customer, you need to complete the following settings before clicking Active
Cloud:
Mail server(SMTP): Enter the SMTP Server of the sending e-mail server. If you do not know the SMTP mail server
address, please consult with the e-mail service provider or check the information on their web page.
Port: Enter the SMTP port of the sending e-mail server
Connection security: If your e-mail server needs the SSL or TLS verification, select SSL/TLS. Check with your e-mail
service provider for the applicable setting.
User name: Enter the e-mail address of the sender.
Password: Enter the password of the sender’s e-mail.
Active Cloud: Click to activate the function. An activation e-mail will be sent to the Receiver e-mail account.
Note:
• An e-mail will be sent to the Receiver e-mail account after clicking ActiveCloud. You must check your e-mail
and follow the link to complete cloud storage activation within 3 minutes.
• A “QR code” also appears on the screen after clicking Active Cloud. Using your smart phone/pad, simply
scan the QR code and confirm the link to activate the Dropbox cloud storage. (Prior scanning the QR code
with the smart phone/pad, you need to download the Kview QR application).
• Every time the cloud storage account is changed or HDD is formatted, you must activate the account again to
recognize the changes.
After all settings are complete, click Apply.