KGUARD Security AR 1621-2CKT001 - Manual (Page 33)

ENGLISH
Aurora Series: Configuring DVR Settings
DVR User’s Manual
33
Basic Menu
System Setup
Device name: Enter the desired
name for the DVR. The name can be
composed of alphanumeric characters
and is used to identify this device in
your list of activated DDNS accounts.
Device ID: Enter the desired ID for
the DVR. The device ID, identifying
the DVR, can only be composed of
numbers and cannot be the same with
other IDs when multiple DVRs are
connected in the same network.
Video format: Choose between NTSC and PAL, depending on your geographical location.
Note:
NTSC - for the USA, Canada, Mexico, Japan, Korea and some other regions.
PAL - for UK, Europe, Australia and some other areas.
VGA resolution: Select how many pixels the DVR will output. It is recommended to use as high resolution as possible
that matches with your monitor’s highest resolution.
Language: Select the language you wish the menu items to be displayed in.
Logout time: Select the time period for menu time out.
Startup wizard: The Setup Wizard will run automatically the first time you start the DVR. The wizard will guide you
through all the basic settings you need to configure for getting your DVR start up and functioning.
Note:
To prevent the Wizard Setup screen appear every time the system reboots, set the setting to Off.
Date/Time Setup
Date/Time
Date/Time: All video footages are
stored on the HDD based on their
time stamps. Make sure you set the
correct system date and time.
Note:
You can click on on-screen
calendar (
) or type in the
current date manually.
Date format: Select the format you
prefer the date to be displayed.
Time format: Select the format you
wish the time to be displayed. The
options are 24 hours or 12 hours.