KGUARD Security AR 1621-2CKT001 - Manual (Page 55)

ENGLISH
Aurora Series: Configuring DVR Settings
DVR User’s Manual
55
PTZ Setup
Here you can configure the DVR to
be able to operate PTZ devices. PTZ
stands for Pan, Tilt & Zoom.
The DVR is compatible with many -
but not all - PTZ devices available. For
more information, please consult the
vendor.
Customize the PTZ camera settings
after the PTZ speed dome is properly
installed via RS-485 connection.
Enable: Check the channel box which
the PTZ camera is connected to.
Protocol: A protocol is like a common language that the DVR uses to communicate to the PTZ device. Make sure this
setting matches the requirements of your device.
Baud rate: Check the PTZ camera documentation to get to know this parameter.
Address: Specify the command address of the PTZ camera that you want to associate with the selected channel.
Copy CH/To CH: Copy the current settings to all channels or one specific channel. Click the arrow to select an option
and then click Copy.
After all settings are complete, click Apply.
Note:
Do not use motion detection function on the PTZ camera to avoid wrong ‘motion’ interpretation.
Search
Record Search
The Record Search allows you to search the recordings saved on the storage. The search can be performed based
on start time, end time, record type and channel. All recordings that match the search criteria are displayed on the
screen.
Select date
Select time
Select channel
Select video type Select the box of
the files that you
want to backup/
lock/unlock.