Compex Systems SGX3226 - Manual (Page 21)

Chapter 4 Software Installation
11
Chapter 4 Software Installation
This chapter explains the basic setup procedures of configuring Compex SGX3226 using the
web-based interface. For more detailed information about Compex SGX3226, please refer to
Chapter 7 “Advanced Configuration for Compex SGX3226” on Page 41.
4.1 Configuring your PC’s setting - TCP/IP Configuration
The first step is to ensure that the PC gets an IP address for which it will use to
communicate across the network. You can begin by giving an IP address to your PC.
1. From My Network Places, right click and select Properties.
2. Next, go to your network adapter and right click to select Properties.
3. Select Internet Protocol (TCP/IP) and click the Properties button.
4. Click on the radio button for Use
the following IP address:. Enter
the IP addresses, such as IP address
- 192.168.100.10 and Subnet mask –
255.255.255.0.
5. If you are connected to Internet,
enter the IP address of your
Preferred DNS server.
6. Click on the Ok button to update
changes.