Compex Systems SGX3226 - Manual (Page 52)

Chapter 7 Advanced Configuration for Compex SGX3226
42
1. Select STP Config from the Command window.
Bridge Port
This option shows the port of the
bridge that connects to the root bridge.
Path Cost
This option sets the Spanning Tree path
cost for this port. A lower path cost
represents higher transmission speed.
Priority
The lower the number has higher
priority.
2. Select one port from 1 to 26 to connect to the root bridge.
3. Key in the value for Path Cost (from 1-65535) and set the priority
level (0-255).