Compex Systems SGX3226 User Manual
Page 26
Chapter 4
Software Installation
16
In Internet Explorer
1. Select the File menu, go to Open and enter the Gateway’s IP address.
This address is set to its factory default as http://192.168.100.128.
2. Click on the OK button.
An authentication page will appeared as shown below. The default
password, which is password, is pre-configured in the field. Click Log On!
Button to access to the main page of Compex SGX3226.
After logging in to the management system, the main page will display as
shown below. The image of Compex SGX3226 is shown on the top
window. The status of each switch port (i.e. link, speed and duplex mode)
can be seen clearly from the LED displays on the image. The lower right
window is used to display the web pages of versatile configuration and
operations.
Command Menu
Window
Configuration
Window