Compex Systems SGX3226 - Manual (Page 58)

Chapter 7 Advanced Configuration for Compex SGX3226
48
If you select Auto Select in the Stacking State field, the system will elect the
switches in connect in the stack with the smallest MAC address to be the master. The
Master switch election will start again when one of the following occurs:
• The master switch is power down
• The master switch rebooted
• The master switch failed
However, if you select either Master or Slave, the connected switch will be set as
your choice.
1. Select Stack Config from the Command window.
2. From the pull down menu, you may select the types of switch you wish to access,
and the information will be listed.