Compex Systems SGX3226 - Manual (Page 27)

Chapter 4 Software Installation
17
The main menu includes four sections in the Command Menu Window, namely
CONFIGURATION, ADVANCED, SYSTEM TOOLS and HELP. The overall
descriptions for individual sub-functions are listed as shown:
CONFIGURATION menu
• Port Configuration – configuration for communications via network
• VLAN Configuration – setup Virtual LAN, whether in tagged or untagged-
based
• Trunking Configuration – Extend the limitation of bandwidth
• DHCP Configuration – setup, reserve or activate DHCP
• WAN Configuration – support Static, Dynamic and PPP over Ethernet services
• NAT Configuration – increase security for unauthorized access through WAN
ADVANCED menu
• STP Configuration - discovers and eliminates redundant paths in the network
topology
• IGMP Configuration - allows the device to forward multicast traffic
intelligently
• Stack Configuration - allows user to enable the stacking function of the
switches.
• SNMP Configuration – monitor and oversee network
• RMON Statistics - enables various network monitors and console systems to
exchange network-monitoring data
• Port Security – secure/reserve certain port/s from other user’s access
• MirrorPort Configuration – duplicate a port's traffic on a port
• Aging Control – limit the resource in the forwarding table
• Address Search – search for Host and MAC address of the connected device in
the network
SYSTEM TOOLS menu
• System Clock – managed and utilize timing based function
• Remote Management - access your Compex SGX3226 through Internet (WAN)
or Local Area Network.
• System Configuration – change of IP Address, Subnet Mask or Gateway
• System Information – indicates essential information of Compex SGX3226
• Change Password – amend system administrator’s password
• Firmware Upgrade – uploading latest firmware to Compex SGX3226
• Save or Reset Settings – save or reset all settings