CITIZEN CT-S300 - Manual (Page 118)

— 113 —
GS (M pL pH fn m
[Function] Customizing the printer
[Outline] Executes processing related to escape/recovery of the value set in the work area or
the data defined by various kinds of command.
• Work area:
Area where data is initialized by power OFF of resetting (initialize). Operation is
made in accordance with the data set in this area.
• Storage area:
Area where data is not initialized by power OFF or resetting (initialize).
Commands for this function
fn Function
1, 49 Copies the set value stored in work area to the storage area.
2, 50 Copies the set value stored in storage area to the work area.
3, 51 Specifies the auto loading function of the set value at initialization to
be valid or invalid.
Command Type Command
Status relations ESC c3, GS a
Macro registration GS :
Character type ESC M, ESC R, ESC t
Font attribute ESC !, ESC –, ESC E, ESC G, ESC V,
ESC {, GS !, GS B, GS b, GS (N
Line feed amount, character space ESC SP, ESC 2, ESC 3
Barcode GS H, GS f, GS h, GS w
2-dimensional code GS (k<fn65~70>
Print position ESC D, ESC T, ESC a, GS L, GS W
Other ESC c4, ESC c5, GS (D, GS P
Kanji control relations FS !, FS &, FS (A, FS –n, FS (n,
FS S, FS W