CITIZEN CT-S300 - Manual (Page 66)

— 61 —
Bit Position
Value
0 1
0 Paper Near-end Disabled Enabled
1 Paper Near-end Disabled Enabled
2 Undefined — —
3 Undefined — —
4 Undefined — —
5 Undefined — —
6 Undefined — —
7 Undefined — —
ESC c 4 n
[Function] Selecting the Paper Near-end Sensor valid for print stop
[Code] <1B>H<63>H<34>H<n>
[Range] 0 n 255
[Outline] This command selects the Paper Near-end Sensor which helps to stop printing when
the paper supply almost runs out.
Each bit for “n” has the following meaning:
[Caution] This printer can only select one kind of Paper Sensor, a Paper Near-end Sensor.
[Default] n = 0