CITIZEN CT-S300 User Manual
Page 151
— 146 —
Before an FF is sent (170th line), the following program code can be added to remove part of the data.
180 PRINT #1, CHR$(&H1B);"W";CHR$(72);CHR$(0);CHR$(120);CHR$(0);
190 PRINT #1, CHR$(36);CHR$(0);CHR$(48)CHR$(0);
200 PRINT #1, CHR$(&H18);
As a result of the additional program code, a print-out is executed as shown in Figure 4-5 “Print Result of
Adding a Program of Example 3 to Example 2”, where the string “GHI” is removed.
When strings are removed with CAN, the area where the string would have been is not used by the rest of the
data, instead it is converted into a sequence of spaces.
Figure 4-5 Print Result of Adding a Program of Example 3 to Example 2
Print area
Paper
Page Mode lesson
2CAN command
ABCDEF JKLMNOP
QRSTU1234567890
200
(0,0)
400
direction