Toa C-CC774 PL - Manual (Page 33)

33
1. With the joystick, select “BACKLIGHT” on the Camera Setting
screen, then press the Set key.
The arrow
moves over “OFF” (factory default).
2. Select the desired item with the joystick, then press the Set
key.
If “OFF,” “WIDE DYNAMIC2,” “PATTERN1,” “PATTERN2,” or
“PATTERN3” is selected, the Backlight Compensation setting
is recorded and the arrow
moves to “BACKLIGHT.”
If “WIDE DYNAMIC” is selected, the arrow moves to
“Wide Dynamic compensation Level Adjustment” screen.
Proceed to Step 3 to adjust the compensation level.
3. Move “ * ” at the appropriate position with the joystick, then
press the Set key.
The Backlight Compensation setting is recorded and the arrow
moves to “BACKLIGHT.” ( )
( )
( )
( )
6.2. Setting the Backlight Compensation
The Backlight Compensation function makes the image displayed on the screen easier to see when there is
strong light behind the subject.
Backlight Compensation may be set to “OFF,” “WIDE DYNAMIC *
1 ,” “WIDE DYNAMIC2 * 2 ,” “PATTERN1,”
“PATTERN2,” or “PATTERN3.” (factory default: OFF)
* 1 C-CC564, C-CC574, C-CC764 andC-CC774 only.
* 2 C-CC574 andC-CC774 only.
OFF:
Turns the Backlight Compensation function off. This is the setting usually used.
WIDE DYNAMIC:
Allows backlight compensation that prevents the subject from becoming too dark or the surrounding
background from becoming too white. When with the C-CC564, C-CC574, C-CC764 andC-CC774, try using
WIDE DYNAMIC as the initial setting to compensate for backlighting.
WIDE DYNAMIC2:
Allows objects in a dark location with a bright background to be distinguished, which cannot be achieved by
Wide Dynamic. However, the bright background may look darker.
PATTERN1, PATTERN2 or PATTERN3:
Turns the Backlight Compensation function on. This automatically adjusts the overall brightness so that
brightness is optimized for easier viewing in the screen areas indicated in shaded region. Select 1, 2, or 3
depending on which makes the intended subject the easiest to see.
Notes
• Backlight compensation will not function whenever the Auto-Flip function (
p. 68 ) is engaged (when the actual
image-flipping is taking place).
• It is possible to make settings different from these for arbitrarily positions. ( p. 80 )
PATTERN 1 PATTERN 2 PATTERN 3
Backlight compensation setting screen
- - - - - -
- * - - - - - -
*
* C A M E R A S E T T I N G *
W H I T E B A L A N C E
B A C K L I G H T
D A Y / N I G H T
A U T O F O C U S
A G C
S L O W S H U T T E R
S H U T T E R S P E E D
N E X T P A G E
B R I G H T N E S S
A T W
R B
O F F
N O R M A L
O N E P U S H
A U T O
X 3 2
N O R M A L
-
Wide dynamic compensation level adjustment screen
L E V E L
L H
- - - - - - - - - - *