Toa C-CC774 PL - Manual (Page 77)

77
* * * - M A S K 1 P A N
S E T T I N G
Subject to be
masked out of view
Now setting screen
Example
12.9. Privacy Masking Settings (C-CC564, C-CC574, C-CC764 and C-CC774 only)
When there are locations that are required to be kept out of view in a camera scene, up to 8 of such locations
can be masked out of view.
Notes
• Setting Privacy Masking to ON automatically disables the Auto-Flip function. Up to 2 areas can be masked
on the same screen when the C-CC564 or C-CC764 camera is used, and up to 4 areas can be masked for
the C-CC574 or C-CC774 cameras. Depending on the masked area and its size, the number of masking
areas that can be set decreases.
• It is recommended that the Privacy Masking function be used in conjunction with the Preset Freeze function.
12.9.1. Setting the Privacy Masking
1. On the Maintenance screen, select “PRIVACY MASK”, then
press the Set key.
2. On the Privacy Masking Setting screen, select “SET”, then
press the Set key.
3. On the Privacy Masking Setting screen, select the number,
then press the Set key.
4. Tilt the joystick left or right to determine the central position of
the horizontal view angle, then press the Set key. The
camera’s zoom is set to the maximum wide angle, displaying
the screen being set.
The masking area can be set in the vicinity of a rectangle
situated in the center of the screen.
M O T I O N D E T E C T I O N
P R I V A C Y M A S K
F R O N T P A G E
* M A I N T E N A N C E *
1 P O S
Maintenance setting screen
S E T
C L E A R
P A T E R N
* P R I V A C Y M A S K *
F U L L
Privacy masking setting screen
* P R I V A C Y M A S K *
S E T
- - - - - - - - - - - - - - - - - - - - - - - - - - -
M A S K 1 : X
M A S K 2 : X
M A S K 3 : X
M A S K 4 : X
M A S K 6 : X
M A S K 5 : X
M A S K 7 : X
M A S K 8 : X
Privacy masking set screen