Toa C-CC774 PL - Manual (Page 37)

37
6.9. Setting the Electronic Zoom
Electronic Zoom* 1 is used to enlarge the view of the subject more than is possible with normal optical zoom* 2
. A maximum enlargement can be set for the Electronic Zoom. It is also possible to set the zoom to stop for a
moment before switching from optical to electronic zoom. (factory default: X12)
OFF:
Turns the Electronic Zoom function off.
X2, X4, X8, X12:
Engages the Electronic Zoom function. The numbers indicate the maximum electronic zoom enlargement.
When the Zoom key (telephoto) is pressed and held, zooming stops for a moment before switching to
electronic zoom. Pressing the Zoom key (telephoto) again continues the image enlargement via Electronic
Zoom.
X2 CONT, X4 CONT, X8 CONT, X12 CONT:
Engages the Electronic Zoom function. The numbers indicate the maximum electronic zoom enlargement.
When the Zoom key (telephoto) is pressed and held, zooming switches from optical to electronic zoom without
stopping so that the zooming proceeds continuously until it reaches the maximum enlargement.
* 1 The zoom function through an optical lens.
* 2 Electronically enlarges or reduces the image by processing stored image signals through an image pick-
up sensor. The more the magnification of electronic zoom multiplies, the rougher screen images are
caused.
1. With the joystick, select “E-ZOOM” on the Camera Setting
screen, then press the Set key.
The arrow
moves to “X12” (factory default).
2. Select “OFF,” “X2,” “X4,” “X8,” “X12,” “X2CONT,” “X4CONT,”
“X8CONT,” or “X12CONT” with the joystick, then press the Set
key.
The electronic zoom function is recorded.
( )
Electronic zoom function setting screen
- * - - - - - -
* C A M E R A S E T T I N G *
E - Z O O M
C H R O M A
S Y N C
E I S
S E N S I T I V I T Y
R E S E T ( C A M S E T T I N G )
F R O N T P A G E
E N H A N C E R
I N T
O F F
O F F
N O
X 1 2
-
- * - - - - - - -
E N H A N C E R - * - - - - - - +
6.10. Setting the Enhancer Function
The Enhancer function enhances the contours within the camera image. It may be adjusted to suit user
preferences.
1. With the joystick, select “ENHANCER” on the Camera Setting
screen, then press the Set key.
The arrow
moves over “ * ” on the setting bar.
2. Move “ * ” at the appropriate position with the joystick, then
press the Set key.
The Enhancer setting is recorded.
Note
Moving “
* ” further to the right on the setting bar increases the
contour enhancement.
( )
Enhancer setting screen
- * - - - - - -
* C A M E R A S E T T I N G *
E - Z O O M
C H R O M A
S Y N C
E I S
S E N S I T I V I T Y
R E S E T ( C A M S E T T I N G )
F R O N T P A G E
E N H A N C E R
I N T
O F F
O F F
N O
X 1 2
-
- * - - - - - - -