Toa C-CC774 PL - Manual (Page 45)

45
Trace start location screen
T R A C E 1
S T A R T P O S I T I O N
Auto operation setting screen
A U T O K E Y
T R A C E
S E Q U E N C E
* A U T O M O D E *
T O U R
A U T O P A N
T R A C E 1 P A U S E T I M E
T R A C E 2 P A U S E T I M E
T R A C E 1
1 s e c
1 s e c
A U T O P A N
1. On the Auto Operation Setting screen, select “TRACE” with
the joystick, then press the Set key.
2. Select “TRACE1” or “TRACE2” with the joystick, then press
the Set key.
The Trace start location screen is displayed.
Note
Select either “CLEAR1” or “CLEAR2” to delete the each
corresponding trace operation.
3. Set the desired angle of view with the joystick, and zoom key,
then press the Set key.
The Trace Setting in progress screen is displayed, then stores
the joystick and zoom operations afterward.
Trace setting in progress screen
T R A C E 1
R E C
E V E N T : 2 5 5
7.4. Trace Function Setting
7.4.1. Storing the Trace operation
Note
Using the rotation limit function after the trace operation has been stored into memory erases the trace
operation memory.