Toa C-CC774 PL - Manual (Page 41)

41
- - - - -
Auto-Pan setting screen
* A U T O P A N *
O P T I O N
P A U S E T I M E
S P E E D
D I R E C T I O N
L I M I T
L I M I T R E S E T
R E V E R S E
1 s
L E F T
L E F T
L E F T
* -
7.1. Assigning the Function to the Auto Key
One of the following 5 automatic functions can be assigned to the Auto key:
(factory default: AUTO PAN)
AUTO PAN: Auto Pan operation begins when the Auto key (or Auto Pan key) is pressed.
SEQ:
Sequence operation begins when the Auto key (or Auto Pan key) is pressed.
TRACE1: Trace 1 operation begins when the Auto key (or Auto Pan key) is pressed.
TRACE2: Trace 2 operation begins when the Auto key (or Auto Pan key) is pressed.
TOUR: Tour operation begins when the Auto key (or Auto Pan key) is pressed.
1. With the joystick, select “AUTO KEY” on the Camera Setting
screen, then press the Set key.
2. Select “AUTO PAN,” “SEQUENCE,” “TRACE1,” “TRACE2,” or
“TOUR1 – 16” with the joystick, then press the Set key.
The function to be assigned to the Auto key (or AUTO PAN
key) is recorded.
Note
“TRACE1,” “TRACE2,” or “TOUR1 – 16” can be operated after
Trace or Tour setting has been performed.
Auto Mode setting screen
A U T O K E Y
T R A C E
S E Q U E N C E
* A U T O M O D E *
T O U R
A U T O P A N
T R A C E 1 P A U S E T I M E
T R A C E 2 P A U S E T I M E
T R A C E 1
1 s e c
1 s e c
A U T O P A N
7.2. Auto Pan Function Setting
7.2.1. Setting Auto Pan option operations
Set the Auto Pan operations. (factory default: REVERSE)
REVERSE: Setting both the left and right limits in the Auto Pan limit setting ( p. 43 ) causes the camera to
automatically pan between the 2 set points.
SKIP: If both the left and right limits are set in the Auto Pan limit setting ( p. 43 ), the Auto Pan operation
begins after returning from an endpoint to a start point. If, for example, the Auto Pan rotation
direction (
p. 42 ) is set for right, after the intermediate panning point between the left and right
limits is first played back, the camera automatically pans in the right direction. As soon as the
camera reaches the right limit, it is instantly returned to the left limit to begin the Auto Pan
operation toward the right limit again.
RANDOM: The camera repeats pan and stop operation between two predetermined points at random timing.
PIVOT: After panning for a distance equal to the horizontal lens view angle, the camera stops for a set
period of time and then again rotates for a distance equal to the lens view angle. This operation is
repeated between the two predetermined points.
1. On the Auto Mode Setting screen, select the “AUTO PAN”,
then press the Set key.
The Auto-Pan setting screen is displayed.
2. Select “OPTION” with the joystick, then press the Set key.
The arrow moves to “REVERSE” (factory default).
3. Select “REVERSE,” “SKIP,” “RANDOM,” or “PIVOT” then
press the Set key.
Auto Pan settings is recorded.
( )