Toa C-CC774 PL - Manual (Page 78)

78
5. Tilt the joystick upward or downward to determine the central
position of the vertical views angle, then press the Set key.
6. Tilt the joystick upward or downward to move the vertical
masking position, then press the Set key.
7. Tilt the joystick left or right to change the horizontal masking
size, then press the Set key.
8. Tilt the joystick upward or downward to change the vertical
masking size, then press the Set key. The masking position
and its size are determined.
Note
The masking movement may not be able to follow the camera’s
distant rotation, allowing the masked portion to only be viewed
momentarily.
Therefore, set the masking size larger than needed whenever
possible.
* * * - M A S K 1 H S I Z E
S E T T I N G
* * * - M A S K 1 V S I Z E
S E T T I N G
* * * - M A S K 1 P A N
S E T T I N G
Object that the
masking is required.
* * * - M A S K 1 T I L T
S E T T I N G
Note
The Privacy Masking function cannot be used when the
camera’s vertical direction is between –45°and –185°.
-185°
-90°
-45°
5°
The range that the
Privacy Masking
function can be set.
Lens