Toa C-CC774 PL User Manual
Page 6
6
From previous page
AUTO KEY
(
p.41
)
AUTO PAN
(
p.41
)
SEQUENCE
(
p.44
)
TRACE
(
p.45
)
TOUR
(
p.47
)
AUTO MODE
(
p.40
)
Sets automatic operation of Auto Pan, Preset sequence, Trace
and Tour.
Assigns automatic function to the Auto key.
Sets the Auto Pan operations.
Sets the preset sequence order.
Stores trace movements.
Sets the operation to be programmed.
ALARM
(
p.51
)
Sets alarm operations.
AUX
(
p.58
)
Sets contact output.
TIMER
(
p.60
)
Sets the timer.
TRACE 1 PAUSE TIME
(
p.46
)
Sets the stop duration of trace movements.
TRACE 2 PAUSE TIME
(
p.46
)
Sets the stop duration of trace movements.
INPUT
(
p.51
)
REPORT
(
p.52
)
ACTIVE STATE
(
p.53
)
PRIORITY
(
p.53
)
RESET ACTION
(
p.56
)
Sets input number of alarm input.
Sets the terminal that transmits the alarm
information.
Selects whether to activate the alarm input with
close or open contacts.
Sets whether to forcibly execute action or to set
priority order to operation.
Sets camera operation when the alarm conditions
are released.
ACTION
(
p.54
)
Sets camera operation when alarm signal is
received.
INTERVAL
(
p.55
)
Sets the period of time that alarm conditions are
maintained.
ALARM DATA
(
p.57
)
Verify alarm logs.
AUX1
(
p.58
)
Sets contact output.
AUX2 *
4
(
p.59
)
Sets contact output.
PROGRAM
(
p.60
)
ENTER TIME
(
p.64
)
Sets predetermined operations to be performed at
preset times.
Sets the time.
TIME DISPLAY
(
p.63
)
Sets time display to 12-hour or 24-hour display
formats.
DATE DISPLAY
(
p.63
)
Sets date display.
ENTER DATE
(
p.64
)
Sets the date.
To next page
SUMMER TIME
(
p.65
)
Sets the summer time (Daylight saving time).
RESET (CAM SETTING)
(
p.40
)
Return each item on the camera setting screen to
the factory default status.
EIS *
5
(
p.39
)
Electronic Image Stabilization settings.
SENSITIVITY *
5
(
p.39
)
Sensitivity-Up selection.