Toa VS-900 - Manual (Page 25)

2-9
CHAPTER 2. BASIC OPERATION OF MASTER STATION
2.8. Auto Dialing
2.8.1. Auto dialing key call
A one-touch press of an auto dialing key automatically dials the station number or functional number of dialing
sequence to activate Paging, Call Forwarding, or other functions assigned to into that key. There are 8 auto
dialing keys [1] – [8].
2.8.2. Auto dialing key registration
Step 1. Set the [REGISTER] switch on the master station's top panel to the ON position. The display panel
will be placed in registration mode.
Step 2. Press the [PTT] key.
The following characters will be displayed.
Step 3. Press the auto dialing key to register.
The selected key number (example: [2]) will be displayed.
If a station number or functional number has already been assigned to the auto dialing key, the
assigned station number will also be displayed following the auto dialing key number (example: [2]).
Step 4. Press the [PTT] key.
The number, if previously assigned and displayed, will be erased.
Re g –m ode
Call
No. 93
Auto dialing key
1
Au t o d i a l
2 :
Example of auto dialing key [2]
2 :
Example of auto dialing key [2]
2 : 9 0 0 0 0 0
Example of auto dialing key [2] already assigned