Toa VS-900 - Manual (Page 70)

5-4
CHAPTER 5. PC-CONTROLLED FUNCTIONS
(5) Public address system setting
Registers the control outputs assigned to the zone designating the exchange number (1 – 16).
Contents Setting Item
Zone Resisters external public address equipment outputs (1 – 16) for each
zone.
Note
Only 1 voice output is made available for paging to external equipment.
It is impossible for 2 or more persons to simultaneously initiate paging.
(6) External source distribution setting
Registers zones to the control input designating the exchange number (1 – 16).
Contents Setting Item
Zone Resisters up to 9 (19) paging zones for each activation input (1 – 4).
(7) Emergency conference setting
Registers the following contents designating the master station.
Contents Setting Item
Member Station Exchange Number Sets the exchange number to which the master station (telephone) is
connected (1 – 16).
Member Station Line Number Sets the line number of the master station (telephone) (1 – 4).
Member Station Number Sets the station number of the master station (telephone).
Member Station Name Sets the name of the master station (telephone).
(8) Direct select setting (Relay output from the VS-910DI card)
Registers the following contents designating the exchange number (1 – 16).
Contents Setting Item
Control Output Mode Selects the external equipment control output operation mode ("make
contact" when conversation begins or when calls are initiated).