Toa VS-900 - Manual (Page 31)

3-3
CHAPTER 3. CONVENIENT FUNCTIONS
TRANSFER-RELATED FUNCTIONS
2. CALL TRANSFER
2.1. Function
(1) Call transfer
A master station (or telephone) can transfer the conversation partner to another master station (or
telephone).
(2) Call Hold and Call Back
These functions enable the master station (or telephone) to temporarily put the current conversation on
hold (Call Hold), and return to the original conversation (Call Back) after talking with a third party.
Note: Master station and telephone operation differs.
2.2. Call Transfer Operation
[Call hold]
Step 1. During a two-party conversation, press the transfer [XFER] key (or when using a telephone, press and
release its hook switch). The original conversation is then placed on hold, and a holding tone is
transmitted to the other party.
Step 2. Dial the third party's station number (example: [9][3]).
When the third party answers, the calling party can talk with the third party while leaving the
original conversation on hold. (Call hold mode.)
After completing the conversation with the third party, the calling party can either transfer the call or restore to
the original conversation (call back).
No. 91
No. 91
No. 92
No. 93
No. 91 No. 92
XFER 9 3
On hold
Holding tone
Second party
Second party
Third party
First party
First party
Dial the third party's station No.