Toa VS-900 - Manual (Page 37)

3-9
CHAPTER 3. CONVENIENT FUNCTIONS
4.3. Time-Based Call Forwarding Operation
[When the Time-Based Call Forwarding registration is set]
Step 1. When the preset forwarding start time arrives, the following indication is displayed on the station
display panel, indicating that the station* (example: 93) is in Time-Based Call Forwarding mode.
* The name of the station may be displayed.
Step 2. Calls to the original station (forwarding station) are automatically rerouted to the receiving station
without sounding a call tone at the original station. (If the original station is a telephone, the call is
automatically forwarded after sounding a brief call tone.)
Step 3. When the forwarding interval end time arrives, the indication of Time-Based Call Forwarding is
extinguished. The current time is then displayed, and the station returns to normal mode.
[Exceptions]
(1) The designated receiving station can directly call the original station without interference from the call
forwarding function.
(2) Even if the designated receiving station is also registered for a Call Forwarding-related function, calls are
no longer forwarded from that receiving station.
FWD : 9 3
Indicates the station is in Time-Based Call Forwarding.
Display panel
FWD : O f f i c e 1
No. 91
No. 92
No. 93
9 2
Original station
Designated receiving station
0:00
12:00
6:00
8:00
18:00
16:00
Forwarding
interval
End time Start time
1 1 : 5 9 am