Toa VS-900 - Manual (Page 30)

3-2
CHAPTER 3. CONVENIENT FUNCTIONS
Step 2. When one of the called master stations (telephones) lifts the handset or presses the [PTT] key, that
station (telephone) is connected to the substation, cancelling the call to the other stations.
Note
The called master station (telephone) may respond to a group call in the same way as when it is called
individually from a substation. (Refer to CHAPTER 2. BASIC OPERATION OF MASTER STATION.)
[Function details and restrictions]
The following explanations assume that a call has been made from a substation* to a master station.
(1) Calls from Emergency substations as well as Normal stations become group calls.
(2) When the group call representative station is placed in Call Forwarding mode, group calls are
automatically rerouted to the designated receiving station without calling other group stations. If the
receiving station (master station or telephone) is registered for Group Call operation, the call is made to all
stations in the same group.
(3) Even when the group call representative or member station is in Busy Call Forwarding or No-Answer Call
Forwarding mode, the call is processed as a normal group call rather than being rerouted automatically.
* Calls from master station to master station will connect to the master station. (In this case, these calls will
not be group calls.)
Conversation
No. 90
No. 92
No. 93
No. 10
No. 91
Called group