Toa VS-900 - Manual (Page 63)

4-1
CHAPTER 4. SUMMARY OF DIALING OPERATIONS AND PRIORITIES
CHAPTER 4. SUMMARY OF DIALING OPERATIONS AND PRIORITIES
1. MASTER STATION OPERATION TABLE
Call/response
Conversation
Speed Dialing
Call Transfer
Call Forwarding
Time-Based
Call Forwarding
No-Answer Call
Forwarding
Busy Call
Forwarding
Scan Monitor
Paging
Outside Line
Outside Line Call
Forwarding
Time-Based Outside
Line Call Forwarding
Outside Line No-Answer
Call Forwarding
Outside Line Busy
Call Forwarding
Conference
Call
Response
Selective Response
PTT (Press-To-Talk)
Conversation
Simultaneous Conversation
Auto Dialing
Redial
Call Transfer
Call Back
Registration at Original Station
Cancellation at Original Station
Registration at Transferred Station
Cancellation at Transferred Station
Registration
Cancellation
Registration
Cancellation
Registration
Cancellation
Start
Stop/Re-start
Scan Forward
Scan Back
Voice Transmission
Termination
Zone Paging
All-Zone Paging
Emergency Paging
Paging Redial
Call
Response
Registration
Cancellation
Registration
Cancellation
Registration
Cancellation
Registration
Cancellation
Three-Party Conference
Emergency Conference
Dial the station number [X][X] ([X][X][X][X]).
Either lift the handset or press [PTT].
Select the calling station using [REDIAL], then
lift the handset.
Select the calling station using [REDIAL], then
press [PTT].
Press [PTT] to talk.
Release [PTT] to listen.
Either party or both parties lift the handset.
Press the Auto Dial key ([1] – [8]).
Press [REDIAL].
Press [XFER] during a conversation.
Other party is placed on hold.
Dial the station number to call a third party.
Conversation with the third party. (Call Hold)
Either replace the handset or press [C].
Transfer completed.
Press [XFER] during a conversation.
Other party is placed on hold.
Dial the station number to call a third party.
Conversation with the third party. (Call Hold)
Press [XFER] again.
Original conversation is resumed. (Call Back)
Dial [ ][6][0][Transferred station No.][#].
Dial [ ][6][0][Original station No.][#].
Dial [ ][6][1][Original station No.][#].
Dial [ ][6][2][Original station No.][#].
Dial [ ][6][3][Transferred station No.][#].
Dial [ ][6][3][Original station No.][#].
Dial [ ][6][4][Transferred station No.][#].
Dial [ ][6][4][Original station No.][#].
Dial [ ][6][5][Transferred station No.][#].
Dial [ ][6][5][Original station No.][#].
Dial [ ][2].
Dial [0] to stop, and [0] again to re-start.
Dial [#] to advance substation monitoring.
Dial [ ] to reverse substation monitoring.
Press [PTT] to talk.
Either replace the handset or press [C].
Dial [ ][8][Zone No.][Zone No.][Zone No.] ...
[Zone No.][#]. (Up to 9 zones can be selected.)
Dial [ ][8][0]([0])[#].
Dial [ ][ ][ ][ ].
Dial [ ][8][#].
Dial an outside line access No.
Lift the handset.
Dial [ ][6][0][Access No.][#].
Dial [ ][6][0][Original station No.][#].
Dial [ ][6][3][Access No.][#].
Dial [ ][6][3][Original station No.][#].
Dial [ ][6][4][Access No.][#].
Dial [ ][6][4][Original station No.][#].
Dial [ ][6][5][Access No.][#].
Dial [ ][6][5][Original station No.][#].
Dial [ ][5][Station No.]. 2-party conversation
Dial [XFER][Station No.]. 3-party conversation
Dial [XFER][ ][5][Station No.] during a two-way
conversation. 3-party conversation
Dial [#][#][#][#]. Station No.: 2 – 6 digits
Telephones cannot be
used.
Telephones cannot be
used.
Between master stations
Telephones cannot be
used.
Cannot be transferred
to a substation.
(The Call Hold function
remains operational.)
Station No.: 2 – 6 digits
Station No.: 2 – 6 digits
Station No.: 2 – 6 digits
Station No.: 2 – 6 digits
Dial while monitoring
[Zone No.]: 1 – 2 digits
[Access No.]: 0 – 9
[Access No.]: 0 – 9
[Access No.]: 0 – 9
[Access No.]: 0 – 9
[Access No.]: 0 – 9
Station No.: 2 – 6 digits
4 master stations
Function Item Operation Remark