Chaparral FS2620R - Manual (Page 15)

Specifications
1-5
Specifications
The Chaparral FS2620R router is a self-contained FC-to-SCSI router in a 1U rack
enclosure with an integrated power supply. The router is ideal for attaching legacy SCSI
storage devices to Fibre Channel SANs. You can install the unit in an industry-standard
19
" cabinet using the Chaparral-supplied mounting brackets. The router can be installed in
either front-mounting or rear-mounting configurations. Table 1-1 provides additional
product specifications.
Table 1-1. Product specifications
Item Specification
Physical 1U enclosure (1.71" H x 17" W x 10.5" D)
Rack mount (with detachable brackets) or desktop use
Front- or rear-mount in racks
Weight: approximately 9 lbs
Fibre Channel GBIC housing for either optical or copper cabling
Supports data transfer up to 200 MB/sec, 400 MB/sec (full
duplex)
(Devices connected via this port are referred to as front-end
devices.)
SCSI LVD/SE model
!
Supports Ultra160 wide data transfer up to 160 MB/sec per
channel
!
Has internal SCSI termination
(Devices connected to the SCSI channels are referred to as back-
end devices.)
Connections Two Fibre Channel (GBIC)
Six SCSI Channels (68-pin)
RS-232 serial port (RJ-11)
10BaseT Ethernet Port (RJ-45)
AC Power
Indicators Fibre Channel activity (2)
Fibre Channel status (2)
SCSI activity (6)
Ethernet activity
Ethernet status
Router status
Router fault
Switches AC Power On/Off