Chaparral FS2620R - Manual (Page 47)

Changing Router Configuration
3-17
9 Select Yes and press Enter to make the changes.
The system confirms that the changes are made.
10 Press Enter to return to the Host Configuration Menu.
Changing the SCSI ID Assigned to Each Router
Channel
The router assigns each of its SCSI channels one of the SCSI IDs (initiator IDs), leaving
15 SCSI IDs available for devices. You can change the SCSI ID assigned to each SCSI
channel.
To change the SCSI ID assigned to a SCSI channel:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2 Select Channel Configuration and press Enter.
The Channel Configuration screen displays.
Note: If you change the topology, FC Link Speed, Loop ID, or router
LUN, you must reboot the router for the change to take effect. See
Rebooting the Router on page 3-23 . If you entered a specific Loop ID or
LUN, check it to see if the current setting is what you entered. If the Loop
ID or LUN is not what you want, change it again.