Chaparral FS2620R - Manual (Page 41)

Changing Router Configuration
3-11
Changing the Screen Display
After you have accessed the Router Administrator software, you can change the screen
display using a combination of keystrokes, as shown on the System Menu. Table 3-2 lists
the keystrokes required to change various screen displays.
Changing Router Configuration
You can use the Router Administrator software to change a variety of router configuration
settings. You can:
!
Configure the FC channels (see page 3-12 )
!
Change the router’s SCSI ID (initiator ID) for each channel (see page 3-17 )
!
Set the date and time (see page 3-19 )
!
Change the scan delay (see page 3-21 )
!
Enable and disable the alarm (see page 3-21 )
!
Restore the default settings (see page 3-23 )
Table 3-3. Changing screen displays
Select Function
Ctrl-A Toggles between ANSI and VT100 character sets (use VT100
for legacy systems)
Ctrl-B Toggles between black and white and color screen
Ctrl-E Toggles between the event log, debug log, hardware
information, and configuration information screens
Ctrl-H Toggles the Help screen
Ctrl-R Refreshes screen
Ctrl-Z Escapes or quits menu