Chaparral FS2620R - Manual (Page 38)

FS2620R Rack Model User’s Guide
3-8
This screen allows you to set the SNMP trap host, enable the traps, and read or write to the
SNMP community (refer to your LAN system administrator for assistance in reading or
writing to SNMP community).
Restarting the Router
Option 4 from the Network Management System Console screen restarts the router. A
screen will display notifying you that your system is restarting.
System Information screen
Option 5 from the Network Management System Console screen displays the About
Network Interface screen displays.
You can view this read-only screen to get information about the system.
Returning to the Router Administrator Software
Press Esc from the Network Management System Console screen to return to the Router
Administration software. The Chaparral FC-to-SCSI Router Administrator screen
displays.
Note: After rebooting the LAN connection you can return to the Password
screen by disconnecting and reconnecting the Telnet session.