Chaparral FS2620R - Manual (Page 56)

FS2620R Rack Model User’s Guide
3-26
If you assign an FC LUN that is already in use, the FC LUNs for the two devices are
swapped. For example, if device A has LUN 01 and device B has LUN 03, and you assign
03 to device A, the LUN for device B becomes 01.
For additional information about address mapping, see Appendix A, Address and Device
Mapping .
To change the device FC LUNs:
1 Set the address mode to FIXED.
See Changing the Mapping Mode (AUTO or FIXED) on page 3-24 .
2 From the System Menu, select Address Mapping and press Enter.
The Address Mapping screen displays.
3 Select Display Address Map press Enter.
The Display Address Map screen displays.
4 Select the device whose LUN you want to change and press Enter.
The Change Address Map screen displays. The text inside the parentheses ( ) shows
the current FC LUN
5 Select the FC LUN number you want to use for this device and press Enter.
You can select any number between 00 and 63.
The system confirms that you want to make the changes.
6 Select Yes and press Enter to make the changes.
The system confirms that the changes are made.
7 Press Enter to return to the Address Mapping screen.