Chaparral FS2620R - Manual (Page 18)

FS2620R Rack Model User’s Guide
2-2
4 Visually inspect the router and notify your freight carrier immediately of any
damage.
5 Record the Media Access Control (MAC) address located on the bottom of the router
chassis for future reference.
Figure 2-1 below shows the front and rear panels of the FS2620R.
Figure 2-1. FS2620R front and rear panels
Installing the Router
You can install the router two ways:
!
On a desktop or table
!
In a standard 1U high, 19" rack
Installing on a Desktop
To install the FS2620R on a desktop:
1 Attach the five rubber feet to the recessed locations on the bottom of the router. (The
rubber feet are required when using the router on a desktop.)
2 Place the router on a table, desktop, or other flat surface.
Installing in a Rack
You can install the router in a standard 1U high, 19" rack. You can either front or rear
mount the router.
Note: Ensure that the front and rear panels have adequate clearance for
the fan, air intake vents (front), and access to all connections.